Precision Couplings - DescriptionMore details
The Reliance range of shaft couplings is designed to provide reliable transfer of motion between two shafts. The range caters for parallel, angular and axial offset conditions. Bore sizes range from 1.5mm to 20mm and, most importantly, all Reliance couplings have to undertake a rigorous test programme that validates their performance. For critical applications test results can be provided if required, for technical assistance please contact us.
High Torsional Stiffness, Zero Backlash, Custom Designs.
Unique design maximises torsional stiffness without introducing high bearing loads.
Chambered for ease of assembly with bore diameters from 1.5mm.
Highly reliable, tested to over 50 million cycles.
Manufactured from aircraft grade aluminium alloy 7075-T6.
High Radial Misalignment Capability, Zero Backlash With Acetal Disc.
Designed to separate for assembly.
Electrically insulating acetal and nylon centre discs.
AT in part number denotes higher torsional stiffness acetal disc.
NL in part number denotes torque capacity nylon disc.
Zero Backlash, High Torsional Stiffness.
Aluminium alloy hubs with stainless steel or nickel bellows or
brass nickel plated hubs with bronze nickel plated bellows.
Flexible Disc Couplings
High Torsional Stiffness.
Zero backlash with robust stainless steel spring membrane.
Ideal for applications requiring accuracy.
Both external and internal hub designs available.
Electrically Insulating, Vibration Isolation, Zero Backlash
Integral clamp with alloy steel (blackened) socket head screw.
Hubs anodised aluminium alloy.
Polyamide 6.6 fibreglass reinforced membrane disc.
Bore diameter tolerance H8.
Curved Jaw Couplings
Good Damping Characteristics, Alternative Damping Element Hardnesses.
Aluminium alloy hubs with polyurethane damping element.
Available with set screw and clamp type hubs.
Good general purpose coupling for reducing torque ripple.
Spiral Beam Couplings
One Piece General Coupling.
Aluminium alloy and stainless steel versions available.
Set screw hub and clamp type hub available.
Outer diameters from 6.5mm to 30mm.
Radial Tooth Couplings
Positive Connection, Minimal Axial Misalignment.
2 off alloy steel (blackened) set screws in each hub.
Manufactured from steel (9SMnPb28) with black finish.
Cannot accept radial or axial misalignment.
Gear teeth 0.7 module.